Global Fastener News

1998 FIN – No Gambling With Slot Machine Screws

October 17
00:00 2014

FEATURES

December 14, 1998 FIN – “A slot machine is a deceptively simple device,” according to Assembly magazine. “Gamblers drop in their coins, pull the lever and collect their winnings – or curse their luck.”

But even slot machines are dependent on fasteners, Assembly noted in a sidebar to an article on “Demystifying Torque Control.”

“In reality, a slot machine must be assembled to rigorous specifications. Its handle is pulled thousands of times daily. The internal mechanisms must be precisely calibrated and remain accurate, despite round-the-clock use. Casinos won’t tolerate malfunctioning machines.”

So when SiliconGaming Inc. began developing a new computerized slot machine with a 27-inch monitor, the company started with extensive prototyping, including establishing assembly procedures and torque specifications for threaded fasteners.

The fastener industry knows how much engineering can go into fastener selection and installation. But the public may be surprised about how much goes into a slot machine.

“We also established torque values so that when we were ready to ship the games, everything would be put together reliably,” manufacturing director Carl Taylor told Assembly. “We didn’t want to break parts or screws. The last thing we wanted was loose screws in the machines.”

SiliconGaming contacted Mountz Inc. for help with fastener tool selection, assembly procedures and torque specifications. 

Mountz developed ergonomic workstations with counterbalanced electric screwdrivers, screw feeders and adapters that permit access to fasteners in tight locations. The drivers apply torque to within +/-2.5% of a set value. ©1998/2014 Fastener Industry News.
For information on permission to reuse or reprint this article please e-mail: FIN@GlobalFastenerNews.com

The 2014 National Industrial Fastener & Mill Supply Expo will be October 22-24 at the Sands Expo & Convention Center in Las Vegas.  Conferences and an opening reception are on Wednesday and the trade show is open 9 a.m. to 4 p.m. Thursday and 9 a.m. to 1 p.m. Friday.

For the NIFMSE story, click on the Fastener History section of GlobalFastenerNews.com:  

2002 FIN – How the Fastener Industry Discovered Columbus 

1997 FIN – Las Vegas Show Gamble Pays Off

Related Stories:

• SHOW NEWS: How 822 Booths in Las Vegas Are More Than 829

Related Articles

0 Comments

No Comments Yet!

There are no comments at the moment, do you want to add one?

Write a comment

Only registered users can comment.

error: Content is protected !!